290
Repair Parts and Maintenance Guide
The information contained in this document is subject to change without notice.
Act-O-Matic
®
Showerhead
AC-51 2.5
4021000
Self-cleaning chrome plated
showerhead without (less) thumb
screw volume control and universal
ball joint. Pressure compensating
2.5 gpm/9.4 Lpm maximum flow
control. All brass construction. 1/2’’
I.P.S. inlet.
PARTS FOR ACT-O-MATIC
®
SHOWERHEAD AC-11/AC-51 2.5 & 2.0, 1.8
Item
No. Code No. Part No.
Description
1.
3328026
SH-1007-A Ball Joint Coupling with Volume Control
†
0328059
AC-18-AV
Ball Joint Coupling less Volume Contro
0328213
AC-313-A
1.8 Gallon Flow Control
2.
0328205
AC-313-A
2.0 Gallon Flow Control Assembly*
3.
5328010
SH-1000-A SH-3 Gasket – 24 per package
0328010PK
SH-3 Single Gasket
4.
0328063
SH-45
Spacer*
0328209
C2A Piston Assembly for Showerhead
5.
0328001
SH-1
Body
‡
6.
4328470
SH-1003-A
Piston Assembly
†
–
OBSOLETE
0328209
AC-2-A-1.8
1.8 Piston Assembly – Shower Head
0328207
AC-2-A-2.0 2.0 Piston Assembly – Needle Spray
†
4328466
SH-1002-A Piston Assembly – Needle Spray
†
2.5 gpm Piston & Gasket (1 & 3)
7.
0328004
SH-2
Coupling Ring
‡
–
OBSOLETE
0328005
SH-2-N
Coupling Ring – Needle Spray
‡
SH-1002-A –
available in SH-1008-A for 2.0 & 2.5 gpm
—
432846
SH-1008-A Repair Kit for Needle Spray Showerhead
includes Items Nos. 2-5 at left (2.5 gpm).
† Includes SH-3 gasket.‡ Chrome plated. Consult factory for other available finishes.* supplied only with 2.0 High
Efficiency Showerhead models.
FLOW CONTROL MODEL CONVERSION
To convert an older Act-O-Matic showerhead to a flow control model,
use repair kit
SH-1008-A
. Repair Kit contains gasket (item 2), piston
assembly – needle spray (item 4) and coupling ring – needle spray (item 5).
NEEDLE SPRAY
NOTE:
To properly repair an Act-O-Matic showerhead, it is important to
identify needle spray part designs. Shower heads with 3 gpm (11 Lpm) or
2.5 gpm (9.4 Lpm) flow controls produced since 1985 use needle spray
piston assembly and a needle spray coupling ring. Needle spray shower
heads can be identified by the following: coupling ring (SH-2-N) has groove
on knurled diameter; plus an “N” marked on the back of the black spray
disc in the piston assembly. When repairing an Act-O-Matic shower head
with a flow control it is important to identify whether the part is of the needle
spray design.
SLOAN ACT-O-MATIC
®
MODELS
In accordance with Federal and State water conservation requirements, all
Sloan Act-O-Matic showerheads manufactured after January 1, 1994 are
available only with an integral 2.5 gpm (9.4 Lpm) flow control. Replacement
components will continue to be available for non-flow control Act-O-Matic
showerhead models. Act-O-Matic showerheads rated at 3 gpm (11 Lpm)
should be repaired using the components shown for the current
2.5 gpm (9.4 Lpm) models.
For Sloan Act-O-Matic model 100 series
shower-heads (discontinued in 1970) use
piston assembly SH-1003-A and SH-2-N.
MODEL
AC-51/AC-11
WITH VOLUME CONTROL SHOWN
GROVE INDICATES
SH-2-N.
(NO GROOVE
INDICATES
OBSOLETE SH-2)
3.0 GPM OR ABOVE
1
2
5
6
7
SHOWERHEAD REPAIR KITS
Code No.
Part No.
Description
For Standard Spray
4328470
N/A
Repair Kit for Standard Spray Showerhead
includes Items Nos. 1-4 (below)
For Needle Spray
4328466
SH-1002-A Repair Kit for Needle Spray Showerhead
includes Items Nos. 1-4 (below)
Additional Repair Items
0328326PK
SH-72
CP Ball Joint
0328068
SH-2N Coupling Ring Needle Spray (2.5 gpm)
4328004
SH-1015-A 1.8 Repair Kit (Flow Control Only)
4328001
SH-1014-A 2.0 Repair Kit (Flow Control Only)
4328469
SH-1008-A 2.5 Conversion Kit
4328287
SH-1004-A 2.5 Repair Kit - 2.5 Flow Control & SH-3
0328097
AC1A - 2.5 Shower Body Assembly (2 & 7 on Chart)
0328206 AC1A - 2.0 Shower Body Assembly (2 & 7 on Chart)
Standard Spray 3.0
or Above
Needle Spray 2.5
BLACK LABEL
OBSOLETE
3
4
LABELS:
BLUE COLOR 1.8
GREEN COLOR 2.0
BLACK COLOR 2.5
BLUE COLOR 3.0
OR ABOVE
AC-11-2.0
4020130
Self-cleaning chrome plated showerhead with
thumb screw volume control and universal ball
joint. Pressure compensating 2.0 gpm/7.5 Lpm
maximum flow control. All brass construction. 1/2’’
I.P.S. inlet.
AC-11-1.8
4020132
Self-cleaning chrome plated showerhead with
thumb screw volume control and universal ball
joint. Pressure compensating 1.8gpm/6.8 Lpm
maximum flow control. All brass construction. 1/2’’
I.P.S. inlet.
AC-51 1.8
4021031
Self-cleaning chrome plated
showerhead without (less) thumb
screw volume control and universal
ball joint. Pressure compensating
1.8 gpm/6.8 Lpm maximum flow
control. All brass construction. 1/2’’
I.P.S. inlet.
AC-11
4020100
Self-cleaning chrome plated showerhead with thumb
screw volume control and universal ball joint. Pressure
compensating 2.5 gpm/9.4 Lpm maximum flow control.
All brass construction. 1/2’’ I.P.S. inlet.
