ATTACH GHOST WHISPER TO FOIL BOARD
Slingshot provides a standard tuttle of 16mm thickness,
before you complete the final assembly please read the
instructions carefully.
WARNING:
Be sure that the tuttle head matches perfectly with your
tuttle box:
If the box of your board is thinner than the Tuttle head you may
need to sand the head to ensure it fits perfectly in the box.
Conversely you may need to add a spacer to the Tuttle head if
the box is too large.
Check that the 2 tuttle screws are the correct length for
your board.
Check that the thread on the two brass bushings is in line
with the respective holes before trying to insert the screws.
1. Coat all hardware with marine-grade grease before
assembling your foil.
2. Rinse your foil after exposure to salt water
3. Ensure all hardware is screwed firmly in place before
each use
4. With regular use, it’s a good idea to occasionally
disassemble, inspect and clean your foil components
to ensure proper condition and working order.
5. Be careful when handling your foil - it can tip over
easily if placed down incorrectly. The safest way is to
set your foil and board down together so it can’t tip or
blow over in the wind.
6. Use a foil bag whenever possible
MAINTENANCE