BEFORE EACH USE
DEATH or INJURY
can occur from improper use or care.
1.
Sling users shall be trained
Do not use this sling unless you are properly trained.
See page 6 for training.
2. Read and follow all instructions and warnings in this manual.
3. Check tag to confirm that sling is adequately rated for the load.
See page 7 for chart.
4. Inspect sling for damage including:
• Missing or unreadable Identification Tag
• Ensure Check-Fast® External Warning Indicator or tell-tail indicators extend past
the tag area of each sling
• If fiber optics are installed, ensure light transmits from end to end
• Holes, tears, cuts, abrasive wear or snags
• Ensure inner red cover is not visible
• Acid or caustic burns
• Exposed core yarn
• Broken or damaged core yarn
• Weld splatter or heat damage
• Fittings that are pitted, corroded, cracked, bent, twisted, gouged or broken
• Any other condition, including visible damage, that causes doubt as to the
continued use of the sling
Inspection Frequencies
1. All slings and rigging shall be inspected before each use.
2. Documented periodic inspections shall be completed at least annually or more frequently
depending on service.
•
Refer to ASME B30.9 and / or contact manufacturer for recommendations for
guidance on service intervals.
IF ANY OF THESE ARE DETECTED - SLING SHALL BE REMOVED FROM SERVICE IMMEDIATELY
1
