{ Design. Uniqueness. Innovation }
11
12
6.1 Melody settings
Enter monitor settings in the way like it described on the previous page:
Ring select
− ring melody selection (16 melodies are available);
Ring time
− melody ringing time in seconds;
Ring vol 1
− melody ringing volume for the first time zone;
Ring vol 2
− melody ringing volume for the second time zone;
Ring vol 3
− melody ringing volume for the third time zone;
Exit
− monitor settings exit.
Note:
If there is some time interval between time zones then maximum volume will be applied during this time
interval.
6.2 Image settings
English
− interface language selection;
Brightness
− image brightness level tuning;
Chroma
− image chroma level tuning;
Contrast
− image contrast level tuning;
Exit
− monitor settings exit.
6.3 Date and time settings
Time
− date and time settings;
Key tone
− touch button sounds enable (On) or disable (Off);
Reboot
− reboot the monitor;
Version
− current software version and release date;
Exit
− monitor settings exit.
Ring select
Ring time
Ring vol 1
08:00 - 12:00
Ring vol 2
12:00 - 18:00
Ring vol 3
18:00 - 08:00
Exit
15
30s
04
06
03
English
Brightness
Chroma
Contrast
Exit
050
050
050
Time
Key tone
Reboot
Version
Exit
2015-06-08 15:49
Off
1-0-8 2017-05-01
5.4 Intercom
Two monitors connected into one system are used.
Melody starts
ringing
Standby mode
Note:
If somebody presses call button on the door panel while intercom is active then the image from the door
panel appears on the monitor screen and call melody starts. Press «Answer»
button to start
conversation with the visitor.
6. Monitor settings
Settings joystick situated on the right side of the monitor case. It has several functions:
• push the joystick in stanby mode to enter monitor settings;
• move the joystick up or down to change current parameter
of the monitor settings;
• push the joystick again to choose current parameter and move
it up or down to change current parameter value;
• push the joystick one more time to save current parameter
value.
Standby mode
Press «Intercom»
button to start
intercom
conversation
Conversation with the
other monitor starts
Press «Answer» button on
the other monitor to start
conversation
Press «Hang up»
button to stop
conversation
UNIQUE
DIRECT
SERIES
Move down
Move up
Push
