DIGITAL GAUGE
You can improve your gas mileage by around 3.3% by keeping
your tires inflated to the proper pressure. Under-inflated tires
can lower gas mileage by 0.4% for every 1 psi drop in pressure
of all four tires. Properly inflated tires are safer and last longer.
INSTRUCTIONS:
1. Press and hold button to turn on gauge. When LCD reads
“
0
” it is ready to measure PSI or push again for BAR, or again
for kPa measurements.
2. Push nozzle of gauge onto tire valve. Make sure a good seal
is made between the nozzle and valve stem so that no hiss-
ing sound of escaping air is heard.
3. Hold gauge on valve stem until the reading locks on the
display.
4. Promptly remove gauge from valve stem and read pressure.
You may continue to use the gauge even though the previous
reading is still displayed by following the instructions above.
5. Press bleeder button to release air. The pressure reading will
change as the air pressure decreases.
6. Press power button for 3 seconds to turn on light . Light
will automatically turn off after 1 minute.
NOTE: Fill tire to recommended pressure.
