CAUTION:
1. DO NOT run vehicle while inflator is operating. Please make sure emergency
brake is set and car is in park.
2. DO NOT use inflator continuously for more than 10 minutes. Allow unit to cool
approximately 25 minutes between uses. Do not leave inflator unattended.
3. ALWAYS use a pressure gauge to check actual tire pressure. DO NOT OVERINFLATE!
4. Read all instructions thoroughly before use. Failure to follow warning instructions
can result in fire, injury to persons or property damage.
5. Keep inflator out of reach of children.
3
2
1
4
INFLATE TIRES
Push the Battery
Level Indicator / Wake
Button to initiate
power.
Place connector on
air valve stem and
push down, then close
thumb latch connector
to secure to valve.
Turn inflator on by
depressing the trigger.
Push the trigger lock** to the middle position, and
depress and hold the trigger button and Inflate
tire to manufacturer’s recommended air pressure.
* When proper pressure is reached, release the
trigger to stop operation of the inflator.
The inflator automatically shuts off after 2 minutes
if left unused.
*NOTE
: Correct tire pressure can be found in vehicle
owner’s manual or on driver’s side door jamb.
** See TRIGGER LOCK POSITIONS on next page.
