Slime 20480 Manual Download Page 2

5

 Gallon (

18.92

 Liters)

85

 to 

125 

PSI / 

5.86 

to 

8.618

 BAR)

36"

 (

91.44

 cm) 

Dial Gauge

 0-150 PSI

CAUTION: PLEASE READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND 

WARNINGS BEFORE OPERATING THIS TOOL. FAILURE TO DO SO MAY RESULT IN 

PERSONAL INJURY AND/OR PROPERTY DAMAGE AND WILL VOID WARRANTY.

1.

  DO NOT OVERFILL TANK! Air tank MAXIMUM fill rating is 

125

 PSI. Use tank within 

its rated operating capacity. Overfilling tank can cause permanent tank damage, 

personal injury or property damaged and will void warranty. 

2.

  DO NOT fill from any source charged with more than

 150 

PSI and DO NOT fill from 

any compressed gas cylinder. 

3.

  Check to ensure all fittings, hose, pressure gauge and valve assembly are tight and 

free from damage or wear before each use.

4.

  Ensure that tank is under no pressure before removing or adjusting any fittings. 

5.

  Keep air hose free from obstruction, binding, and twisting.

6.

  Do not drag or carry tank by the air hose, gauge or valve.

7.

  Discard tank immediately if any leaks develop. DO NOT attempt to repair or weld any 

tank designed to contain pressure. 

8. 

 Discard tank if it becomes dented or damaged.

9.

  Discard or destroy tank by date stamped on canister.

10. 

Always wear eye protection when operating this tool. If raising dust/debris, wear a 

suitable mask. 11. Always use tank in a safe manner, protecting yourself and others in 

the work area from possible injury.

11. 

Always use tank in a safe manner, protecting yourself and others in the work area 

from possible injury.

TECH SPECS

CAPACITY
OPERATING PRESSURE
AIR HOSE LENGTH
PRESSURE GAUGE

AIR TANK OPERATION INSTRUCTIONS:

Filling Air Tank:

DO NOT OVERFILL! 

Fill tank from clean, dry air source to between 85 and 125 PSI

1. Turn the red ON/OFF air adjustment knob clockwise to the OFF position. 
2. Press the chuck from air source onto the tank fill stem.
3. Watch the reading on the tank pressure gauge. DO NOT EXCEED MAXIMUM 

air pressure of 125 PSI.

4. When the tank has filled to the desired pressure, remove the air chuck from 

the tank fill stem.

5. The 5 gallon air tank is now filled and ready to use.

Summary of Contents for 20480









Reviews: