Page 1
Squeezebox Graphic Display
Upgrade Installation Instructions
Tools required:
•
Torx T-10 screwdriver
•
Wire cutters
Precautions:
•
This display module is designed
exclusively for Squeezebox
. It will not work in SLIMP3 or
any other product. Attempting to connect it to other devices may damage the display or the
device.
•
The glass is
fragile
and may have
sharp corners
. Handle with care. Never force the case
closed – everything should fit without forcing.
•
When returning the old display to Slim Devices, please pack it only using the included packing
material and in the same container.
•
High voltages
are present when the display is powered on. Do not touch the circuit board
while the display is running – it might shock you or damage the display. Do not attempt to
install the display while bathing.
Installation instructions:
Make sure you have the latest software. Download SlimServer v5.2.2 or newer, which includes the
latest Squeezebox firmware. You will be prompted for a firmware update. After completing the
update, navigate to Settings->Information->Player Information->Player Firmware Version. Make
sure that the version number shown is
31 or higher.
DO NOT PROCEED
UNTIL YOU HAVE
VERIFIED THAT YOU ARE RUNNING A
FIRMWARE VERSION OF 31 OR GREATER!
If you have any questions about the installation please contact our support staff at
or call us at +1 (650) 210-9400.
