Power Cords
PIGTAIL MOUNT
The cord should be installed by pulling it
in from the rear through the power cord
mount hole. With the cable partially out
of the case the cable grommet should be
clipped on to the power cord, and then
clipped into the metal plate. The metal
plate can then be mounted via
2x
M3x5mm FLAT HEAD
screws.
STANDARD MOUNT
The power cord should be installed by
pulling it in from the rear through the
power cord mount hole, passing through
the cable mounting bracket. The inlet
and metal plate are then mounted via
2x
M3x5mm FLAT HEAD
screws as shown.
