4
3. KAIROS CONTROLLER
3.1. Firmware update
3.2. Connection
The
KAIROS
Controller is the brain of the motion control system. It’s required
for the
FOOT CONTROLLERS
to work.
Before proceeding, make sure that the firmware of your
KAIROS
is updated.
FOOT CONTROLLERS
are supported from version 2.0.8 (ethernet-based
systems with
Slidelink 3.0
) or 1.1.5. (systems equipped with
Slidelink Pro
)
and above.
To update the
KAIROS
controller, use the
Slidekamera Firmware Updater
tool, which you can download from
www.slidekamera.com/software
.
1. Turn off the
KAIROS
before connecting
FOOT CONTROLLERS
.
2. Plug the
D-SUB/Lemo
cable to
the
AUX
port of the
KAIROS
and the
FOOT CONTROLLER
equipped with two Lemo sockets
(it’s irrelevant which socket you
use).
3. Connect
FOOT CONTROLLERS
using a Lemo cable.
Always connect both FOOT CONTROLLERS!
4. Power-up the
KAIROS
Controller.
Detection of auxiliary manipulators
is performed at startup. Therefore,
connecting them to a powered-up
device won’t work.
NOTE
2
3
Summary of Contents for FOOT CONTROLLERS HAD-10
Page 8: ......
