manualshive.com logo in svg

Sleipner SEP-IP60, Installation Manual, Page: 2 / 28

Share
Download
Sleipner SEP-IP60 Installation Manual Download Page 2

Products 

SEP60/185S-12IP - SEP60 Tunnel thruster, 12V-IP

2

4354

11

2021

-

SEP IP 60

DECLARATION OF CONFORMITY

Sleipner Motor AS

P.O. Box 519, Arne Svendsensgt. 6-8

N-1612 Fredrikstad, Norway 

Declare that this product with accompanying standard control systems complies with the 

essential health and safety requirements according to:

DIRECTIVE 2013/53/EU

DIRECTIVE 2014/30/EU

DIRECTIVE 2014/35/EU

MC_0020

Bow Installation Instructions

Bow Installation Considerations and Precautions ..................... 3

Thruster Measurements   .......................................................... 4

Thruster Specifications

 .............................................................. 5

Technical Specifications  

 .......................................................... 5

Positioning of the tunnel / thruster ............................................. 6

Tunnel Length ............................................................................ 7

Tunnel installation in sailboats ................................................... 8

Water Deflection

 ........................................................................ 9

Tunnel ends ............................................................................. 10

Tunnel installation ............................................................. 11 - 12

Stern tunnel installation ........................................................... 13

Thruster Installation Instructions

Thruster Installation Considerations and Precautions ............. 14

Gear Leg & Motor Bracket Installation..................................... 15

Propeller Installation ................................................................ 16

Motor Installation ..................................................................... 17

Thruster Electrical Installation ................................................. 18

Electrical Specifications 

 .......................................................... 19

Control Panel Cable Installation  ............................................. 20

S-link Planning & Precautions  ................................................ 21

Technical Wiring Diagram  ....................................................... 22

Control Panel Installation ........................................................ 23

Checklist for DC and IP Thrusters  ...................................... 24

 

Service and Support  ......................................................  25

Product Spare Parts and Additional Resources  ...............  25

Warranty statement  ......................................................  25

Contents

EN

Summary of Contents for SEP-IP60





























Reviews:

No comments