14
6399
12
2022
-
HydroPOD 35 & 50
Control Box Installation
Follow the below steps to install the Control Box. Additional installation details can be found in the corresponding graphics.
1. Pull the blue SX Thruster Hose around the cable harness coming out of the SX Thruster. Fasten the hose clamp.
2. Defi ne the location to install the Control Box. It can be mounted in any orientation, preferably with cables facing down. The control box must be
positioned within 0.75 meters from the thruster attachment bolts. Ensure that the SX Thruster Hose will not obstruct any objects and not placed
near any object that radiate high temperatures.
3. Mark the locations of the four drill holes and drill the holes. Ensure that the back wall where the Control Box is to be mounted have suffi cient
thickness and strength.
MC_0075
MG_0530
Control box
installation
location
SX thruster
hose
Max 0.75m
1
2
3
Hose claps
