SLEIPNER MOTOR AS RCS 20E Installation & User Manual Download Page 2

Page: 2 / 12

Installation & User Manual, S-link Radio Remote rev 1_0_0

Page 2

Sleipner Motor AS

declare that this

device complies with health and safety

requirements according to the Directives

EN301 489-3 V1.4.1:2002

EN301 489-1 V1.4.1:2008

IEC 60533:1999

EN300 220-1 V2.3.1:2010

EN300 220-2 V2.3.1:2010

The radio remote control can control a single bow thruster or a bow and stern thruster combined.

The receiver can receive the signals of up to four transmitters.

Remote control kit RCS-20E consists of:

- Receiver: Part no. RCRS-2E

- Transmitter (incl. battery): Part no. RCT-20E

- Holding bracket for transmitter unit: Part no. RC-HOLDER

Additional transmitters can be ordered separately; Part no. RCT-20E

Model range................................................................................................................................ 2

Technical specifications

.............................................................................................................. 3

Important precautions ................................................................................................................. 3

Receiver installation ................................................................................................................... 4

User precautions ........................................................................................................................ 6

How to use RC20E ...................................................................................................................... 7

Transmitter LED operation and alarm indication ......................................................................... 8

Electric diagram ........................................................................................................................... 9

Programming additional transmitters ......................................................................................... 10

Replacing transmitter battery.................................................................................................... 11

Dimensions .............................................................................................................................. 12

Model range

Contents

Summary of Contents for RCS 20E













Search results

Summary of Contents for RCS 20E

Reviews:

Related manuals for RCS 20E

Brands by name

Popular brands

SLEIPNER MOTOR AS RCS 20E, Installation & User Manual

Search results

Summary of Contents for RCS 20E

Reviews:

Related manuals for RCS 20E

Brands by name

Popular brands