Directions for Use
● Connect the thermal cannula
using Sleepsense interface cable
by inserting metal plugs on either
side of the nose piece. (figure 1).
● Position cannula on face,
inserting nasal prongs into
nostrils. (figure 2).
● IMPORTANT: Adjust oral prong
so that thermal wire loop is
positioned in front of mouth.
(figure 3).
● Connect interface cable to the
PSG system.
● Ask the patient to breath through
his nose and mouth and ensure
that clear signals are recorded.
1
insert
2
3
Item N15807
- ver.2.5 (side B)
Warnings and Precautions
• Caution: This product is for diagnostic purposes only and is not to be used
as an apnea monitor or in a life sustaining situation.
US Federal Law restricts this device to sale,distribution and use by or on
the order of a physician.
• SleepSense sensors are for professional use only.
• SleepSense sensors may be used only in conjunction with an approved
recording system.
• Discontinue use if sensor shows signs of wear, damage, or exposed metal.
• SleepSense sensors are only intended for use on healthy skin.
Indications for use
SleepSense sleep-lab sensors provide a qualitative measure of sounds,
respiratory-effort, flow, body position or limb movements, for recording on an
approved data acquisition system.
They are intended for use on children and adult patients who are screened during
sleep disorder studies at a sleep laboratory or the patient’s home.
