Use 4 Hex Bolts
inside each panel.
IMPORTANT!
First choose depth for mattress to
floor height. High setting adds height.
Assembly Guide
SleepSafer (Tall Bed)
SleepSafer (Dual View)
After unpacking bed and checking the contents
Insert Barrel Bolts
into Back and
Front Panels.
(Note: Barrel Bolts
are pre-inserted in
padded beds)
Align and push in
Barrel Nut as shown.
Use flathead
screwdriver for
assistance.
.
Attach Panels
to foundation.
(Use 3/8” wrench
to install eight
3/4” Hex
Bolts inside
the panel))
SleepSafer Bed (Tall Bed) Back Panels uses 10 Barrel Bolts
SleepSafer Bed (Tall Bed) Front Panel use 6 Barrel Bolts
* Dual View Option uses 2 Front panels only. No Back Panels.
BACK PANEL*
BACK PANEL*
FRONT PANEL
6
MANUAL ELECTRIC COMBO
SleepSafeBed.com
1-866-852-2337
3629 Reed Creek Dr. | Bassett, VA 24055
Set Manual
Electric Combo
Foundation on
4 provided
cardboard spacers.
When placing spacers beneath
foundation, allow room for both
side panels to be attached.
HEAD
FOOT
IMPORTANT!
CHECK THE BED ORDER FOR THE
DESIRED LOCATION OF THE CRANK. In this diagram, the front crank
has been mounted to the left of the head. The front crank position
may have been mounted to the right of the head.
Reference
Only.
Crank installed
in later step.
