Insert the safety rail hinge pins into both posts from the down position.
Then pivot the safety rail up to attach securely to the posts.
Prepare Safety
Rail Hinge Pins
for Installation.
Factory preset has hinge pins that may be extended.
These pins need to be adjusted evenly on both
sides to fit properly when inserted into the posts.
NOTE: Full instructions for safety rail adjustment are found on page 10.
CLOCKWISE
INCREASES play.
COUNTER-CLOCKWISE
DECREASES play.
Install
Mattress
and
Safety Rails
Strike
Hinge Pin
Attach Headboard
and Footboards
to Panels.
Fasten (6) 90mm
Allen Bolts to each panel
with 4mm Allen Wrench.
Once headboard and
footboards are attached,
remove cardboard lifts.
Casters are
pre-installed
IMPORTANT:
When installing the Back Panel
the Barrel Bolts need to be away from the frame
or, in other words, toward the wall.
Install
Back
Panel.
Set in place
with alignment
pins, then fasten with
(2) 90mm Allen Bolts
to each post.
NOTE:
This step not
necessary for
Dual View option
ALIGNMENT
PINS
Install Four Rails
for DUAL VIEW option.
7
