Place the lower back in the hot water. Remove after 20 seconds and
then place over your lower teeth. You most have the upper device
on
when molding the lower. Push the plastic around teeth and into the cer-
vices. Close your mouth and lightly clench to sink your teeth into the
soft plastic. Use your fingers to pinch in front and behind the front teeth
Close your mouth and move the jaw for-
ward 80% of maximum or less if un-
comfortable. Use your fingers to push
the wings against the upper device and
in front of the wheels. They should be
straight up so as to not irritate the
check.
After 1 minute remove it
by placing thumbs under
the wings and push up.
Lower in hot water—Upper Must Be On
Wings in front of wheels
In Mouth 1 minute
Trim Device as need-
Trim the lower device with sharp scissors as needed.
