8
Cautio
!
Usage
Turning On/Off the Headset
z
Move the switch as shown,
to turn on the power.
z
Move the switch as shown,
to turn off the power.
Connecting the Headset to a Bluetooth Device
z
Connection between headset and Bluetooth mobile phone or
other Bluetooth devices is made wirelessly through an
encoded authentication.
The following registration process should be performed
for the initial connection.
1. Set the headset into stand by mode. With call button pressed, you
may turn on the power. (As the operation status LED flicks in Blue
and Red color, stand-by mode lasts for around three minutes.)
2. Search the headset from the Bluetooth device, referring to the
Bluetooth device user’s manual.
3. Select “SRS-200BS” from the searched list.
4. Enter “0000” when Bluetooth asks for password or pin-number.
5. Select “SRS-200BS” from the list of registered devices.
Please refer to the User’s Manual of your mobile phone for the
details about Bluetooth headset connection, registration and
deletion.
* Once registered, there is no need for re-registering for future
connection.
* If there is no registered devices in three minutes of register-stand-by
mode, it automatically switches to connect-stand-by mode. In this
case, turn off the device and try to register from the beginning.