background image

TABLE OF CONTENTS

   1.0    INTRODUCTION  ............................................. 2

   2.0    SPECIFICATIONS .............................................3

   3.0    BOILER LOCATION  .........................................7

   4.0    CHS 300-399 COMMON VENTING

            ASSEMBLY INSTRUCTIONS ...........................9

   5.0    TERMINATION OPTIONS

            - DIRECT VENT  ............................................ 17

   6.0    INSTALLATION CHECKLIST  .........................21

MODELS CHS-300 through CHS-399

INSTALLATION AND OPERATING INSTRUCTIONS

IMPORTANT

READ ALL OF THE FOLLOWING WARNINGS AND STATEMENTS

BEFORE READING THE INSTALLATION INSTRUCTIONS

This manual must be left with owner

and should be hung on or adjacent

to the boilerfor reference.

®

C

US

COMMON VENTING

©Slant/Fin Corp. 2014 • 

814 • PUBLICATION CHS-40-CV

!

DANGER

Danger Sign: Indicates a hazardous situation which,

if not avoided, will result in serious injury or death.

Warning Sign: Indicates a hazardous situation which,

if not avoided, could result in serious injury or death.

Caution Sign plus Safety Alert Symbol: Indicates a hazardous situa-

tion which, if not avoided, could result in minor or moderate injury.

Caution Sign without Safety Alert Symbol: Indicates a hazardous

situation which, if not avoided, could result in property damage.

Notice Sign: Indicates a hazardous situation which, if

not avoided, could result in property damage.

This Common Vent System must be installed by a licensed and trained Heating

Technician or the Warranty is Void. Failure to properly install this system may

result in property damage, serious injury to occupants, or possibly death.

!

WARNING

!

CAUTION

CAUTION

NOTICE

!

WARNING

Summary of Contents for 818 192

























Reviews: