SL ZERO EDGE PRO, Owner'S Manual, Page: 12 / 25

BD or ST BD or ST
23 22
3
Carefully lie the frame onto the screen material making sure to not dent the screen
material with the frame or frame corners. Align the edges of the screen material with
the edges of the frame.
NOTE: For short throw material make sure the material is oriented such that the LED
harness is at the bottom of the screen material.
DO NOT drop the frame onto the screen material. Frame must
be gently set down onto the screen material to avoid denting the
material.
For Short Throw
LED harness at bottom
4
5
Remove and discard the black retaining bumpers then spread out the posts so that they
align with the attaching bands.
Pull up and then over on the bands to attach to the posts so that the SI diamonds are
showing. Do this at all 4 corners before proceeding. Make sure the screen material is
centered about the frame by making sure the edges of the screen material line up with
the edges of the frame.