background image

Quick Start Guide

1.Install the antenna and faceplate.
2.Use power cables to connect battery to the goggles, Goggles can power by 2~6cell lipo battery, hold 
  the power button to turn on.
3.Focus adjustment: move the focus adjustment wheel to focus, close one eye to adjust the focus, you can
  pop up the OSD menu as the template, when the image is clear, repeat the process with the other eye.
4.IPD adjustment: move the IPD slider until there is no double vision of the image.

Band and Channel setting

1

Press the right wheel, then roll right wheel to change channel, press the wheel again switch to Band  

  

setting mode, then roll the wheel to change the Band.

2

.No wheel operation for 3 seconds,RF setting will 

quit

 the 

channel

 setting mode.

3

Hold the right wheel to pop

 

up

 

search

 

menu

press

 

the

 

right

 

wheel

 

to

 

start

 

auto search, after searching

   all the frequency, receiver will  work on the strongest signal. roll the right wheel to manually select the 
   channels, short press the right wheel to quit searching.

     

Sometime the auto search channel is not accurate, user may need manually select the channel.

V

olume Setting

·

In all mode preview 

mode, roll the left wheel to adjust the volume.

·

Volume setting is only effective on earbud. Not effective on AV OUT volume. 

·

System didn't save the volume setting, in case of the volume is too high in AVIN or RF mode.

MODE MENU

·

Short press the left wheel to pop up mode menu. 

·RF normal: this mode is normal 48 CH receiv

er

 mode.

·RF Racing: this mode will make receive

r

 only work on RaceBand.

·RF Third-Party: in this mode, the goggles button cant control the external receiver, also the OSD of the
   goggles cant read the 

band

/

channel

 of the receiver.

·AV

IN

: When enable the AV IN mode . The NTSC and PAL system format can be supported to be 

   automatically switched. The receiver module will be automatically turned off  to save the power.
·HDMI IN  the receiver module and the video recording module will be automatically turned off to save 
  the power.
·Playback: in this mode, customer can review the DVR 

Fil

es

.

·Playback: in this mode, customer can review

  the DVR 

Fil

es

.

DO NOT EXPOSE THE LENS DIRECT TO SUNLIGHT, OTHERWISE
THE SCREEN WILL BURN IN.

4

Summary of Contents for SKY04X









Reviews: