SkyZone SKY02S, User Manual

Page: 6 / 11

·
Press the <CHANNEL> button to adjust channels and <BAND> button to adjust bands in circular
manner, then the screen will display BAND, CH and frequency.
·
Such mode support channel search.
Front Camera
·
The font camera of such FPV glasses has VGA resolution and good low illuminance, enabling to easily
observe surroundings very easily without taking off the glasses.
·
In any mode, you may press the <CAMERA> button quickly to open the front camera.
·
The front camera is designed only for temporary view to see surroundings; so it cannot record the
image to the storage card nor output the same via AV OUT. During video recording, the activation of the
front camera will not affect the recorded video.
·
When the front camera is activated, you may have normal mode switching.
Image Adjustment
·
In the image setup menu, you may set such parameters as Brightness, Contrast, Saturation, Hue and
Sharpness to as to achieve personalized display effect.
·
On the function item to be set, press the <OK> button to enter setup state, press the <UP/DOWN>
button to zoom in/out images with images displaying the adjustment effect in real time; press the
<ESC> button to back to the previous menu.
·
It is recommended to set such parameters in very clear image state.
Head Tracking
·
Head tracking needs initialization time. When powered on, be sure to keep the product horizontal and
stable. When you hear “Beep”, it means the initialization is completed and you may start to use head
tracking; or you may press the <TRACK> button shortly when this device keeps stable to use such
function normally.
·
Press short <TRACK> button to reset the PPM signal to the central location with warning tone.
·
In menu, you may set PPM channels as CH5-CH6, CH5-CH7, CH5-CH8, CH6-CH7, CH6-CH8 or CH7-CH8.
·
Pan Tracking range: 180° (90° for left and right respectively), 120° (60° for left and right respectively),
90° (45° for left and right respectively), 90° as default.
·
Tilt Tracking range: (60° for left and right respectively), 90°(45° for left and right respectively), 60°(30°
for left and right respectively), 90° as default.
·
Pan Correction: Via such setup, you may separately compensate the central deviation of Pan. You may
set it at 0~10 levels, and the actual compensation angle is related to the turning angle of the cradle
head.
·
Tilt Correction: Via such setup, you may separately compensate the central deviation of Tilt. You may
set it at 0~10 levels, and the actual compensation angle is related to the turning angle of the cradle
head.
·
PPM Reverse: <Normal> as default setup, <Pan> as the reverse of such channel, <Tilt> as the reverse
of such channel
，
<Pan & Tilt> reverse in two directions.
Recording
·
It is recommended to format the storage card that is initially installed. (See “Format SD Card” section
hereinafter for details).