Upgrade Firmware
Goggles
1,Connect goggles to the computer. Connect goggles with battery.
2,Hold the mode button then turn on the goggles, release the mode button, computer will automatically
install the driver , computer will show a new removable storage .
3, Copy the goggles firmware to storage.
goggles will installing the update at the same time. When the
copying is done, the firmware upgrade is done.
Receiver Firmware
1, Power on the goggles, Connect goggles to the computer by usb.
2,Go to system menu, select RX firmware update.
3,computer will show a new removable storage ,Copy the goggles firmware to storage.
goggles will
installing the update at the same time. When the copying is done, the firmware upgrade is done.
This content is subject to change, download latest version from:
Firmware Update
brightness may cause a slight brightness drop in screen.
·
OLED Sleep MODE: To prevent OLED burn out, the goggles have OLED sleep mode, The sleep mode
can be set in the menu( 1minute 3minutes 5 minutes, default 3 minutes.) When sleep mode is enabled
the goggles will detect the movement of the goggles (via headtracker gyro), when the goggles stay
still to the preset time , the buzzer will beep , after 10 seconds, the goggles will switch to sleep mode ,
the oled screen will turn off, move the goggles to quit OLED sleep mode.
·
When OLED sleep mode is triggered, the rest functions of goggle is still working (receiver ,DVR etc)
.
·
OLED Screensaver:image will move 1pixel/10s, flow the order: middle→right→middle→left→middle,
circulating. this function can't turn off
.
To quit OLED Sleep mode: Move the goggles when hearing beep.
SYSTEM
·
Power supply , user can choose battery type(2S~6S) to make sure goggles shown real capacity
of the battery
Voltage calibration gives user 0.9V range to adjust the voltage, when calibrate the voltage, use
·
±
multimeter to measure the loaded voltage of the battery, then use shuttle wheel to adjust voltage.
System Language can select in to
Chinese
·
: English,
.
·
The speed of fan can be set in the system menu, press the POWER button to start up/stop the fan.
FW upgrade:User can upgrade
Firmware from SD card in this menu.
·
RX
Receiver
Factory
: User can reset all the functions and settings in this menu.
·
settings
www.skyzonehobbies.com
