·
Short press to switch to Front Camera mode in any mode
·
Long press 3 seconds to fast switch to 2D from 3D RF Mode
RF mode
3D mode
·
3D mode in RF mode, and will be in 2D in all other modes.
·
Press up/down button to adjust the 4 default channels.And it is also ok to custom the RF Band to select
the proper band and channels.(Caution
：
there will be interference if select frequency too close. The
recommended frequency interval is 40MHz
·
Long press<CAMERA>button to fast switch to 2D mode.
2D mode
·
They will work in diversity mode if close the 3D mode in the menu. And the setup in 3D mode will not
work.
·
Press <CHANNEL>button to select channels, and <BAND> for band, multiple press to cycle.
·
Front Camera
·
The Front Camera is Wide-Angle Camera with 680X480(VGA) Resolution and good low Illumination. It's
very convenient to view around without taking off the Goggles.
·
Press "Camera" button to open the Front Camera.
·
The Front Camera can neither be recorded nor display via AV OUT but for viewing around only. It's ok to
open the Front Camera while recording.
·
It's ok to setup the goggles with the Front camera turning on
Image adjustment
·
It's ok to adjust the Brightness
、
Contrast
、
Saturation
、
Hue
、
Sharpness Parameters in Image setup
Menu
·
Press REC/OK button to enter setup and press UP/DOWN to adjust, press ESC to exit
·
It's recommended to adjust while the image is good.
Head Tracker
·
Please keep the goggles in horizontal position and steady, initialization is ok when there is 1 beep. Or
short press the <TRACK> button.
·
short press the TRACK button with beep to setup the PPM to center.
·
Setup PPM CHANNEL in the Menu
：
CH5-CH6
、
CH5-CH7
、
CH5-CH8
、
CH6-CH7
、
CH6-CH8
、
CH7-
