２
Operation Instructions:
Figure 1
Figure 2
1.
Power Source: DV12V 1 or DV12V 2 or battery. LED1 is to RX1 and LED2 is to RX2,
better signal first.(See Figure1).
2.
Connected with TV from the AV OUT to view on TV
3.
Plug AV cable into AVIN(Figure1),LCD will display external AV signals automatically.
4.
Open the battery cover to put the 2S Li-po battery inside to power the monitor. (Note:1.
please remove the batter and recharge when it's showed low battery 2. it doesn't
recharge the battery when power with external DC power, so please remove the
battery to recharge)
5.
Press "PLAYBACK" button to enter playback mode
6.
Press "+" to increase volume
，
press"-"to decrease volume with volume icon shows the
on the right of Screen
7.
Press "OK/REC" in Video preview mode to start record and press "OK/REC" again to
stop.
8.
Press "MENU" to enter the menu,
Press"-"and"+" to choose, press "OK/REC" to set
