SKYZER TECHNOLOGIES
PAGE 17 OF 38
INGENICO I5100 VERSION 6.0 CONFIGURATION GUIDE
Version 1.0
3 . 1 . 3
TCP-IP (BROADBAND) CONFIGURATION FLOWCHART
From the idle screen
press
FUNC
and
then key in
3824
followed by the
ENTER
Key in the Terminal and
Merchant ID into the
terminal followed by
the
ENTER.
At the
COMMS MODE,
press the corresponding
number key to select
preferred comms mode
and press
ENTER
1-Dial-up
2-TCP-IP/Dial
3-TCP-IP
Press
ENTER
at the
CONFIG PARAMS?
Network Interface
Identifier
(NII)
by
default will be selected
as
001
and press
ENTER
If TCP-IP is selected, the
Primary Host IP address
is set as default
117.120.34.110, press
ENTER
.
Secondary Host IP
address is set as default
117.120.32.110, press
ENTER
.
Manually key in the
•
Static IP address
•
Subnet Mask
•
Gateway IP
address
followed by
ENTER.
START
YES
NO
At the
Enable DHCP Y/N
, by
default is selected as
1-YES
and press
ENTER,
if the site
has DHCP
If the site has no DHCP
enabled, press
2-NO
and
then press
ENTER
.
COMPLETED
START TCP-IP Y/N?
Press
ENTER
to start
TCP-IP or
CLEAR
to exit
without starting TCP-IP
Save Config Y/N?
Press
ENTER
to save
or
CLEAR
to exit
without saving
