28
n tallation anual
5.4 Installation Indoor Unit
Step 1: Choosing installation location
5HFRPPHQGWKHLQVWDOODWLRQORFDWLRQWRWKHFOLHQWDQGWKHQFRQ¿UPLWZLWKWKHFOLHQW
Step 2: Install wall-mounting frame
+DQJWKHZDOOPRXQWLQJIUDPHRQWKHZDOODGMXVWLWLQKRUL]RQWDOSRVLWLRQZLWKWKHOHYHOPHWHUDQGWKHQSRLQWRXWWKHVFUHZ¿[LQJ
holes on the wall .
'ULOOWKHVFUHZ¿[LQJKROHVRQWKHZDOOZLWKLPSDFWGULOOWKHVSHFL¿FDWLRQRIGULOOKHDGVKRXOGEHWKHVDPHDVWKHSODVWLFH[SDQVLRQ
SDUWLFOHDQGWKHQ¿OOWKHSODVWLFH[SDQVLRQSDUWLFOHVLQWKHKROHV
)L[WKHZDOOPRXQWLQJIUDPHRQWKHZDOOZLWKWDSSLQJVFUHZV67;7$DQGWKHQFKHFNLIWKHIUDPHLV¿UPO\LQDWDOOHGE\SXOOLQJ
WKHIUDPH,IWKHSODVWLFH[SDQVLRQSDUWLFOHLVORRVHSOHDVHGULOODQRWKHU¿[LQJKROHQHDUE\
Step 3: Open piping hole
1. Choose the position of piping hole according to the direction of outlet pipe. The position of piping hole should be a little lower than
the wall-mounted frame, shown as below.
2SHQDSLSLQJKROHZLWKWKHGLDPHWHURIɎɎRQWKHVHOHFWHGRXWOHWSLSH
position. In order to drain smoothly, slant the piping hole on the wall slightly downward
to the outdoor side with the gradient of 5-10°.
indoor
outdoor
5
～
10
°
ɎɎ
Note:
Ɣ3D\DWWHQWLRQWRGXVWSUHYHQWLRQDQGWDNHUHOHYDQWVDIHW\PHDVXUHVZKHQRSHQLQJ
the hole.
Ɣ7KHSODVWLFH[SDQVLRQSDUWLFOHVDUHQRWSURYLGHGDQGVKRXOGEHERXJKWORFDOO\
Step 4: Outlet pipe
1.The pipe can be led out in the direction of right, rear right or left.
2.When select leading out the pipe from left or right, please cut
off the corresponding hole on the bottom case.
cut off
the hole
left
right
rear right
Left
Wall
Φ55/Φ70
Right
Mark in the middle of it
Level meter
Rear piping hole
Wall
Space
to the
wall
above
150mm
Space
to the
wall
above
150mm
Φ55/Φ70
Rear piping hole
Dimension: 1109x331x250mm
Left
Wall
Φ55
Right
Mark in the middle of it
Level meter
Rear piping hole
Wall
Space
to the
wall
above
150mm
Space
to the
wall
above
150mm
Φ55
Rear piping hole
Dimension: 821x283x200mm
Left
Wall
Φ55
Right
Mark in the middle of it
Level meter
Rear piping hole
Wall
Space
to the
wall
above
150mm
Space
to the
wall
above
150mm
Φ55
Rear piping hole
Left
Wall
Φ55/Φ70
Right
Mark in the middle of it
Level meter
Rear piping hole
Wall
Space
to the
wall
above
150mm
Space
to the
wall
above
150mm
Φ55/Φ70
Rear piping hole
Dimension: 884x298x205mm
Dimension: 1003x310x222mm
