Operation Instruction
3
5
Search
Parameter
Code
Parameter Name
Parameter
Range
View Mode
F00
Settable
parameter entry
-
F03
Search for indoor
unit engineering
code and location
1~16
1. The Timer area displays the current indoor unit
engineering code.
2. Location of a faulty indoor unit: Press the "
" button
to access the location of an indoor unit. The buzzer of
the associated indoor unit will sound for 2 seconds.
Press the "
" button to exit location menu. The
buzzer of the current indoor unit will stop.
F05
Search for
number of online
indoor units
1~16
F08
Ambient
temperature of an
indoor unit
-30 to 90
F11
Ambient
temperature of an
outdoor unit
-30 to 90
Unit Parameter Setting
Press and hold the "
" button on the wired controller for 5 seconds. The temperature
display area of the wired controller will display the searchable parameter code "F00". Then,
press and hold the "
" button on the wired controller again for 5 seconds to enter the
parameter setting interface and the temperature display area will show a flashing "A00".
Press the "▲" or "▼" button to select the parameter to set and then press the "
" button.
The timer area displays the parameter value to set and flashes. You can press the
"▲" or
"▼" button to change the parameter and finally, press the "
" button to complete the
setting and return to the previous menu.
