Skyworth 42E68, Instruction Manual

Page: 46 / 91

factory, select “ AUTO ADC ” item in the “ ADC CALIBRATION ”
menu, press
→
button to begin auto adjust. When it is finish, it will
show “OK” or “FAILE”. If “FAILE” is showed, you need to try
again.
NOTE:
YPBPR ADC need to do twice by use 576P and 720P
signal separate.
VGA source ADC:
Switch to PC source, input tessellated white and black signal,
enter factory, select “ AUTO ADC ” item in the “ ADC CALIBRATION ”
menu, press
→
button to begin auto adjust. When it is finish, it will
show “OK” or “FAILE”. If “FAILE” is showed, you need to try again.