background image

Copyright © 2021 Skyworks Solutions, Inc. All Rights Reserved.

Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the 

information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. 

Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, 

products,  services,  specifications  or  product  descriptions  at  any  time,  without  notice.  Skyworks  makes  no  commitment  to  update  the  materials  or 

information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.

No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability 

for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or 

materials, except as may be provided in Skyworks’ Terms and Conditions of Sale.

THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR 

OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY 

INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR 

COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR 

ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT 

LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT 

OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks 

products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such 

applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale.

Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of 

design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating 

safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any 

equipment resulting from the use of Skyworks products outside of Skyworks’ published specifications or parameters.

Skyworks, the Skyworks symbol, Sky5

®

, SkyOne

®

, SkyBlue™, Skyworks Green™, Clockbuilder

®

, DSPLL

®

, ISOmodem

®

, ProSLIC

®

, and SiPHY

®

 are trademarks or 

registered trademarks of Skyworks Solutions, Inc. or its subsidiaries in the United States and other countries. Third-party brands and names are for 

identification purposes only and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at 

www.skyworksinc.com, are incorporated by reference.

Portfolio

www.skyworksinc.com

Quality

www.skyworksinc.com/quality

Support & Resources

www.skyworksinc.com/support

Connecting Everyone

and Everything,

All the Time

Skyworks Solutions, Inc.  |  Nasdaq: SWKS  |  [email protected]  |  www.skyworksinc.com

USA: 781-376-3000  |  Asia: 886-2-2735 0399  |  Europe: 33 (0)1 43548540  |    

Summary of Contents for Si4822-DEMO




















Reviews: