IDP 700 Terminal Series - Hardware Guide
T206, Version 01 44 © SkyWave Proprietary
Once the terminal synchronizes itself with the network, it sends a registration message to
the SkyWave IsatData Pro network.
Note:
The terminal will not register until it has a clear line of sight to the
satellite.
The SkyWave IsatData Pro network records the registration message and forwards the
registration message to the user’s application.
The SkyWave IsatData Pro network sends an acknowledgement message over the
satellite to the terminal. The terminal is now available to send and receive messages.
4.12 Application Programming Interface
Refer to [T202] for programming information for the terminal.
4.13 Cleaning Instructions
The transceiver and GPRS antenna are for indoor use and under normal circumstance
should not require any cleaning. However, if cleaning is required, wipe with a damp cloth
using a mild detergent if necessary. Do not immerse in water and ensure that water does
not enter through the connector openings.
The satellite and GPRS antennas can be steam cleaned or pressure washed with mild
soaps or detergents.
Summary of Contents for IDP 700 Series
Page 70: ...www SkyWave com ...
