Triggering SMS Violation Messages:
The following conditions will trigger the system to send out violation SMS
message:
In arming status, there is movement inside the vehicle (Ultrasonic
Sensor).
Vehicle’s signal lights will flash and siren will sound. SMS message
“Shock on” will be sent out to users twice.
In arming status, the vehicle’s door/bonnet/boot is open.
Vehicle’s signal lights will flash and siren will sound. SMS message “Door
opened” will be sent out to users once.
In arming status, the engine is started.
Vehicle’s signal lights will flash and siren will sound. SMS message
“Engine on” will be sent out to users once.
In arming status, the vehicle’s power supply is disconnected.
SMS message “Power supply failed” will be sent out to users once.
In arming status, press Emergency Help button on the Remote Control
(KRA) for 3 seconds.
Vehicle’s signal lights will flash 3 times quickly and siren will sound 3
times quickly. SMS message “Urgent help” will be sent out to users once.
When ignition is on, press the Hijack switch for 3 seconds.
Vehicle’s signal lights will NOT flash and siren will NOT sound. ONLY
COMMAND MANAGEMENT SERVICE (CMS) CENTER will receive
SMS message “Be robbed”.
7
SMS Violation Message:
Violation SMS
Message
Door opened
“Door Opened”
Boot opened
“Door Opened”
Bonnet opened
“Door Opened”
Ignition on
“Engine On”
Sensor on
“Shock On”
12V Battery Disconnected
“Power Supply Failed”
Hijack
NO MESSAGE WILL BE SENT OUT
SMS Violation Message Display:
8
