17
DISASSEMBLY (TAKING APART)
To disassemble (take apart) the trampoline, follow assembly steps 1 through 8 in reverse order. Do not attempt to
disassemble any frame parts before the springs and the mat have been removed. Use gloves to protect your hands
from pinch points while taking the trampoline apart.
Safety Note: Do not use the trampoline without the
Frame Pad. The Frame Pad comes in 2 pieces. The Frame
Pad is designed to reduce the possibility of injuries due to
jumpers coming in contact with the trampoline frame. If
you do not have a Frame Pad, contact your dealer to
obtain one. Properly install the Frame Pad before using
the trampoline.
7
. Look under the trampoline pad and locate the straps
attached to the underside of the Frame Pad.
Position each outer strap so that one strap is on each side
of the frame as shown.
Refer to the inset drawing. Thread one of the inner frame
straps through a V-ring and tie down. Repeat this with all
the inner straps along the inside of the frame pad.
Arrange the outside straps so that the straps encircle the
frame. Thread strap through buckle and securely tighten.
Repeat this step with the remaining straps (not shown).
8
. Secure the corners of the Frame Pads to the frame
using the attached straps. Hook the straps to the D-rings
at each corner.
9
. Using the included plastic tie, attach the Safety Placard
(11) to the frame near the enclosure opening.
The trampoline is now fully assembled. Make sure that
all parts are securely attached. Familiarize yourself and
all users of the trampoline with the safety precautions,
use and instructional materials, and care and maintenance
instructions in this manual before using the trampoline.
11
6.
Lay one of the two frame Pad (10) on the frame.
Adjust the position of the Frame Pad so that the slits are
directly above the frames (2), as shown. Securely tie the
two frame pads together using the attached straps.
Spring Tool Provided
Mat
