20
Attach all the remaining V-rings with spring to
Top tube holes correspondlingly.
Enclosure door
Lay the Frame Pad(6) on the frame. Adjust it’s
position so that the slits are just above the Sockets
as shown.
Do not use the trampoline without the Frame
Pad(6).The Frame Pad is designed to reduce
the possibility of injuries due to jumpers coming
in contact with the trampoline frame.
If you do not have a Frame Pad,contact your
dealer to obtain one.Properly install the Frame
Pad before using the trampoline.
5.5
T-joint
Socket
slit of Pad
CAUTION:
6.
6
6
6
7. Look underneath the trampoline. Locate the straps
attached to the underside of the Frame Pad. Position
each outer strap so that one strap is on each side of
the frame as shown. Tie the outside straps sewn to
the Pad Joints to each side of the frame as shown
and attach the inner straps to the near V-rings.
Repeat this step to tie the remaining straps (not shown).
6
7
Strap sewn in the outside of
the Joint for the pad bottom
Inner Straps
Frame
V-ring
Outer Strap
Outer Strap
Inner Straps
