22
Make sure the bent side of the enclosure poles
are facing toward the center of the trampoline.
The end of the Straight Tubes(9) are sharp.
be careful when assembling.
Repeat this process to assemble the remaining three
poles to the trampoline frame.
9
Leg
Socket
T-joint
Frame Pad
11. Start from the Enclosure door, lift one of the
assembled poles and then insert the Straight Tube(9)
into the vertical tube of Socket as shown.
NOTE:
11
Jumping mat
Leg
Enclosure door
Poles
T-joint
Socket
9
9
13
Socket
Insert the end cap(13) into the bottom hole of the
Socket as shown.
12.
12
13.
10
12
Strap
Strap
Using a ladder, reach to the top of the enclosure
poles and tie the straps around the pole caps as
shown. Make sure to secure the knot tightly.
(Do not stand on the edge of the trampoline to do
this step. It can be dangerous and could damage
the trampoline).
