manualshive.com logo in svg

Skywalker SWTC040, Assembly And User'S Manual

Share
Download
Skywalker SWTC040 Assembly And User'S Manual Download Page 8

14

15

ASSEMBLY    

ASSEMBLY    

                   

 

 

 

PART LIST

Key No. 

Qty. 

Description

  1 

5 

Frame

  2 

5 

Rail

  3 

5 

Leg

  4 

1 

Mat with enclosure net

  5 

1 

Pad with lower enclosure net

  6 

25 

Elastic with ball

  7 

5 

Curved tube

  8 

5 

Long foam (pre-installed)

  9 

5 

Short foam for curved tube (pre-installed)

 10 

5 

Foam for rail

 11 

15 

Self-tapping screw

 12 

5 

Pole cap

 13 

5 

Cap

 14 

1 

Screw driver

Before beginning assembly of your bouncer, please take a complete inventory of all parts. Please 

ensure you have all necessary components and familiarize yourself with each part.

ORDERING REPLACEMENT PARTS

To order replacement parts, visit our web site at www.skywalkertrampolines.com or call our 

toll-free Customer Care Hot-line at 1-866-603-Jump (5867), Monday through Friday, 8 a.m. 

until 5 p.m. Mountain Time (excluding holidays).

To help us assist you, please provide the following information when calling:

• The MODEL of the trampoline (see the front cover of this manual)

• The KEY NUMBER and DESCRIPTION of the part (see the PART LIST above)

• The quantity needed

• The desired method of shipping

1.

  

Frame x5

11

1

Locate two frame pieces (1), and place them on the ground. Make sure that the larger diameter tubes are 

facing the ground. Insert the small end of frame piece A into the other end of frame piece B. 

Repeat this step until all five frame sections are connected.

1

1

A

B

Note:

 Make sure the frame is turned so the big 

diameter tube is facing the ground.

Note: 

At this step the frame may not lay flat on 

the ground. The frame will straighten out with 

further assembly.

Small diameter tube

Small diameter tube

Big diameter tube

Big diameter tube

Summary of Contents for SWTC040














Reviews:

No comments

Brands by name

Popular brands

Load more brands