11
STEP 7
Place the jump mat
(5)
on clear ground inside the frame.
Make sure the 2 warning decals align with 2 T-joints!
STEP 8
You may want to use gloves for this step!
Before you begin, make sure
each V-ring has been threaded through the holes on the enclosure
net.
Make sure the enclosure door is lined up with a T-joint.
Using the
spring tool, hook the
smaller end
of a spring into the
V-ring
just
left of
the enclosure door.
Stretch the free end of the spring until it reaches
the
frame hole
just
left of the T-joint.
Springs
(x1)
Spring Tool
(x1)
8
23
(23)
First V-ring
First hole
T-joint
Enclosure door
T-joint
Warning label
Warning label
Enclosure door
T-joint
