5
STEP 2
Elastic Cord
(x1)
When assembling, make sure the
bullseye
part of the net is
centered on a leg piece
(not between 2 legs). It might be best
to
assemble
on the
leg section
furthest from
the
enclosure
door.
Wrap the
PVC section
of a
side net
(2)
around the
left leg
of the trampoline
leg section
as shown. Then, insert an
elastic
cord
(3)
into the
top grommet
on the
back
of the
PVC panel.
Then, insert the same
elastic cord
(3)
into the
correct hole
on the kick back
net
(1)
.
Refer to step 1 to find the correct hole on the net!
Next, thread the elastic cord through the
top grommet
on the
front
of the
PVC panel,
and then thread the cord through the
second grommet
on the
front
of the
PVC panel
as shown.
3
1st hole
2nd hole
3rd hole
Side Net
(x1)
2
STEP 3
Kick Back Net
(x1)
1
