8
1
2
3
3-1
Insert the Left upright tube(3) into the Left handlebar with foam (1) as shown ,and secure with
ST4.8 Screw(4), then attach right handlebar in the same way. then units(A) and units(B) will be
completed, as shown
A
B
4
4
ASSEMBLY
1
、
5
5
6
6
6
7
7
7
7
7
Large end
Large end
Large end
Large end
Large end
Small end
Small end
Small end
Small
end
Small end
2
、
Insert the large end one of Frame(7) into the opening of Leg (6), and then insert the samll end
of another Frame(7) into the same Leg(6), in the same way to insert other frames (7) into the
Leg (6) or Leg(5) .
Place the two Legs with welding tube(5) in adjacent position as shown ,otherwise the next
Handlbar can’t be assembled correct.
NOTE:
If you can’t find a part during the assembly , please check to see if it has been preassembled.
Notice:do not tighten the Screw(4)
Notice:do not attach units(A) and units(B)
