6
ASSEMBLY
3. Adjust the net to remove any folds or overlaps.
Make sure the net fits snugly around the frame.
4. Once the net is adjusted and evenly spaced, tie the
left edge of the net to the right edge by threading
the straps through the grommet holes, around the
back of the trampoline leg, and back through the
grommet holes on the other side. Tie a bow to se
-
cure. Do this for each set of holes.
5. Finish attaching the top of the net by tying the
straps at the previously skipped grommet sets.
6. Locate the metal stakes (3). Begin placing them in
the grommet holes at the bottom of the net starting
with the grommets on either side of the target.
Place the remaining stakes, one in-between each of
the legs and one in the middle of each leg assembly
or, as evenly spaced as you can.
Note: There are extra grommet eyelets along the
trampoline net. This is to accommodate different
sizes of trampolines. Use the grommets that best
fit your trampoline frame.
