7
. Tie the straps that are sewn on the edge of the enclos-
ure mesh around the outside of the cap. Make sure to
secure the knot tightly, see insert drawing A..
Note: The enclosure poles are high, be careful when
you attach the straps. If needed, please use a ladder.
10
6
6.
Note:
In Step 6 you will secure the enclosure poles
to the frame of the trampoline.
Start from the enclosure door, lift one of the poles assembled
in Step 1, see the insert drawing. Insert the Straight Tube(5)
into the top hole of the Square Socket on trampoline frame
as shown.
Make sure the bent side of the enclosure poles
are facing toward the center of the trampoline.
Note:
The end of the straight tubes(5) are sharp. Use
caution when assembling.
Repeat this process to assemble the remaining five poles
to the trampoline frame.
Strap
6
1
A
Strap
1
Enclosure
Door
Poles
Pad
Inset drawing
5
Leg
Leg
Socket
Jump Mat
Frame Pad
T -joint
