09
Charging The Board
The board need to be fully charged before your first use. Before charging make sure both the board and the
charger are powered off.
Using any other charger may cause damage to the board or batteries, and will void your warranty.
Plug the board charging cable into the board power port and plug the other end into a working outlet.
It should take around 3 hours to fully charged. (Pls refer to the actual charging time.)
The indicator light on the charger will turn from red to green when the charge is complete.
Only charge the board when the charge port is dry and free of debris.
Do not leave charging for over 6 hours.
FIRST RIDE
1. Charge the remote and board fully.
2. Turn on the board and controller and make sure everything is powering up correctly.
3. Press the power button 2 seconds to power on the remote and select the “Beginner mode”.
4. Test the brake by pressing downwards on the throttle. Step on the board with the brake applied, find your
balance, and gently push forward on the throttle of the controller until the board starts moving.
5. Pushing the throttle more will make you go faster. Pushing downward on the throttle to slow down.
6. Press the power button 2 seconds to power off the remote or board.
Practice riding on smooth flat pavement and always wear a helmet.
