10
Knob
(x5)
M8x45mm
Bolt
(x2)
ASSEMBLY
STEP 5
Insert a knob
(6)
into the hole on the top of each leg
(17)
and twist to tighten.
Note: Make sure the knobs are tight before each use of the trampoline.
6
(6)
(17)
STEP 6
Spring
Washer
(x3)
M8 Capnut
(x2)
8
10
9
11
M8x30mm
Bolt
(x1)
(11) (8)
(4)
(1)
(11)
(10)
(8) (9)
(9) (8)
(11)
(8)
Connect the lower handle
(4)
to the
trampoline frame by sliding the open
tube of the handle onto the tube on the
underside of the frame
(1)
and
placing
the main tube of the handle snugly
against the curved bracket on the frame.
Tighten together with two M8X45mm
bolts
(11)
, two spring washers
(8)
and
one M8 capnut
(9)
at
the
front of the
lower handle
and one M8X30mm bolt
(10)
, one spring washer and one capnut
underneath the frame
as shown.
