Warning label
First hole
First V-ring
1
2
3
4
Enclosure door
Warning label
Warning label
Now, place two middle frame tubes
(bend facing out)
between the two
frame halves. Slide the two halves of the trampoline together to create a
free standing frame.
Note: Tighten all the bolts to secure into place.
10
STEP 7
1
Middle Frame Tube
(x2)
(1)
(1)
STEP 8
Enclosure Net
(x1)
Jump Mat
(x1)
7
8
Now place the enclosure net
(7)
on the jump mat
(8)
, and make
sure the first hole and the first V-ring line up. Now insert the
first
V-ring
into the
first hole
. Then, insert the
remaining V-rings
into
their
corresponding holes.
Once you’ve finished, the enclosure net
should be fully attached to the jump mat.
Important! The first hole
is the hole directly to the left of the enclosure door zipper. The first
V-ring is the V-ring directly to the left of the warning label.
ASSEMBLY
