18
INSPECTION, MAINTENANCE AND STORAGE - KEEPING YOUR
Sky Walker
IN GOOD NICK
We highly recommend that you routinely inspect and maintain your
Sky Walker
, as you would a
bike, board or car. If you discover abnormalities or have any issues with your
Sky Walker
, please
contact
Sky Walker Australia
immediately for advice.
INSPECTION AND MAINTENANCE
Check the body and tyres of your
Sky Walker
for damage or excessive wear.
Avoid using harsh chemicals or solvents if you wish to clean and wipe down your
Sky Walker
. Do
not allow any liquids to enter the ports or buttons of the
Sky Walker
.
The
Sky Walker
is IP 54 rated, meaning that it can withstand small splashes of water. It is NOT water-
resistant or waterproof and must not be operated or stored in waterlogged conditions. Water and
other liquids can cause permanent damage to the circuitry and electronic components inside the
Sky
Walker
.
STORAGE
Store your
Sky Walker
indoors, in dry conditions at a suitable temperature.
If the ambient temperature of the storage location is below 0°C/32°F degrees or above 55°C/131°F
degrees, please select an alternative storage location.
To prevent dust and particles entering your
Sky Walker
during storage, please seal it inside its
original packaging and add additional layers of protection where desired.
If storing your
Sky Walker
for extended periods of time, please note that the charge level of the
Sky
Walker
may be depleted during storage. We recommend re-charging your stored
Sky Walker
every
3 months to make sure it is ready to ride when it is brought out of storage.
Summary of Contents for 6.5" Sky Walker
Page 1: ...USER GUIDE ...
