TOOLS REQUIRED
PARTS LIST FOR TEETER TOTTER
7
M8X18 Bolt
M8X50 Bolt
M8X62 Bolt
M6X15 Bolt
M8 Locknut
M8 Spring Washer
M8 Washer
6mm Hex Key
Wrench
L-Screwdriver
SAFETY INSTRUCTIONS
FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR
PROPERTY DAMAGE AND WILL VOID WARRANTY.
Owner must ensure that all players know and follow these rules for safe operation of the system.
To ensure safety, do not attempt to assemble this system without following the instructions
carefully. check entire box and inside all packing material for parts and/or additional instruction
material. Before beginning assembly, read the instructions and identify parts using the hardware
identifier and parts list in this document. proper and complete assembly, use, and supervision are
essential for proper operation and to reduce the risk of accident or injury. A high probability of
serious injury exists if this system is not installed, maintained, and operated properly.
• a recommendation to place the toy on a level surface at least 2 m from any structure or
obstruction such as a fence, garage, house, overhanging branches, laundry lines or electrical
wires;
• detailed instructions on how anchors are to be installed to prevent overturning or lifting of the
support members during normal or foreseeable misuse also taking into account the condition of
the soil normally encountered;
• instructions that anchors shall be placed level with or under the ground in order to reduce
tripping hazards;
• instructions that toys (for example swings, slides, climbing frames) shall not be installed over
concrete, asphalt or any other hard surface;
• a recommendation on the orientation of the toy in relation to the sun (e.g. slides);
• information to keep assembly and installation instruction for further reference.
Most injuries are caused by misuse and/or not following instructions.
Use caution when using this system.
TOOLS REQUIRED
•
Two (2) Capable Adults
• Tape Measure
• Hammer
• #2 or #3 Phillips
Screwdriver
• Safety Glasses
• Large and Small
Adjustable
Wrenches
M10X75 Bolt
M10 Locknut
9
10
11
12
13
14
15
16
17
18
19
20
