Skyvue C-NXG-4970-P, Owner'S Manual

Page: 22 / 52

20 All Rights Reserved. Sky Vue
®
Connecting with Component
1. Make sure the power of TV and your
set-top box is turned off.
2. Obtain a Component Cable. Connect the
green color connector to both your
set-top box and Component green
a connector port off the back of your TV.
3. Connect the blue color connector to both
your set-top box and Component blue
connector port off the back of your TV.
4. Connect the red color connector to both
your set-top box and Component red
connector port off the back of your TV.
5. Obtain a RCA Audio Cable. Connect the
white color connector to both your
set-top box and Component white con-
nector port off the back of your TV to the right side of your green, blue, red component connection.
6. Connect the red color connector to both your set-top box and Component red connector port off the back
of your TV to the right side of your green, blue, red component connection.
7. Turn on the TV and your set-top box.
8. Use the remote control’s input button or the input button on the TV to switch to YPbPr.
Please Note :
1. Please refer to the set-top box’s manual to make sure the settop box is configured to output correctly to the TV.
2. This TV will turn off automatically if there’s no signal present for more than 15 minutes.
Connecting with Composite
1. Make sure the power of the TV and your
DVD/Blu-ray player is turned off.
2. Obtain a Yellow Video Cable. Connect
the Yellow Video connector to both your
DVD/Blu-ray player and Composite’s
Yellow Video connector port off the back
of your TV.
3. Connect the white color connector
to both your DVD/Blu-ray player and
Composite’s white connector port off the
back of your TV.
(Continued on next page)
Cable Box
Satellite
OR
Located on Back of TV
Located on Back of TV
Cable Box
Satellite
OR