20
All Rights Reserved.
Sky
Vue
®
Connecting with Component
1. Make sure the power of TV and your
set-top box is turned off.
2. Obtain a Component Cable. Connect the
green color connector to both your
set-top box and Component green
a connector port off the back of your TV.
3. Connect the blue color connector to both
your set-top box and Component blue
connector port off the back of your TV.
4. Connect the red color connector to both
your set-top box and Component red
connector port off the back of your TV.
5. Obtain a RCA Audio Cable. Connect the
white color connector to both your
set-top box and Component white con-
nector port off the back of your TV to the right side of your green, blue, red component connection.
6. Connect the red color connector to both your set-top box and Component red connector port off the back
of your TV to the right side of your green, blue, red component connection.
7. Turn on the TV and your set-top box.
8. Use the remote control’s input button or the input button on the TV to switch to YPbPr.
Please Note :
1. Please refer to the set-top box’s manual to make sure the settop box is configured to output correctly to the TV.
2. This TV will turn off automatically if there’s no signal present for more than 15 minutes.
Connecting to an External
Amplifier or
Amplified Speakers
Connecting with Digital Coax (Best
Option)
1. Make sure the power of the TV and your
receiver is turned off.
2. Obtain a Coaxial SPDIF cable, connect it
to your receiver’s Coaxial
SPDIF digital input and the Digital Audio
Out port on the back of the TV.
3. Turn on the TV and your receiver.
Please Note :
1. If you want pure digital stream for your receiver
to decode, you must also configure the TV’s OSD Sound->Digital Audio Out function. Make sure the option is on Bit
Stream.
Cable Box
Satellite
OR
Located on Back of TV
Located on Back of TV
Cable Box
Satellite
OR
