SKYVAC INDUSTRIAL 85 WITH ELITE POLES
7. SKYCAM MOUNTING
SkyCam Sold Separately
SkyCam Instructions
Press the button behind the
water proof boot to switch the
camera on. A light will come on
once you’ve turned the camera
on.
See camera instruction manual
for full user guide.
Attach the camera using spring
clip to the blue flexi neck tool
holder.
Pre inspect the gutter to deter-
mine which tool to use, and
problem areas.
Remove camera when vacuum-
ing to prevent damage to
equipment.
Attach monitor to you’re base
pole, at eye level using spring
pole clip.
Switch monitor on, which auto-
matically connects to the camera.
Once completed vacuuming, re
-
attach camera to do final checks.
8. MACHINE MAINTENANCE
Look after your equipment
After every shift, flush the
inside of tubes and flexi
hose by sucking half a
bucket of water up into
the vacuum and empty.
This help keep the pole
joints clean from grit.
Always clean your poles to ensure
the joints are clean and free from
grit/dirt which may prematurely
wear the joints.
TIP:
During cleaning wet or damp
gutters, dirt can sometimes stick
and line the inside of your poles.
The poles will get cold to touch and
the weight of the poles will be in-
creased slightly. To remedy this
place the end tool in water and
suck up a small amount of water.
