GB
Warning
In order to avoid shock hazard and damage to the unit, please follow the safety rules below:
-
Do not connect the power supply if the unit, the lead or the plugs are damaged.
-
Only for indoor use
-
Do not attempt to repair or change the unit yourself.
-
Unplug the unit prior to changing the output voltage;
-
Prior to using the unit, check all connections.
-
If the output voltage seems to be wrong, unplug the unit immediately and check the connections.
Operation
Refer to the instruction manual of the unit you wish to power to determine the correct output voltage and the
polarity (+ and -) of the plug.
First of all determine the correct output voltage and select the see through connector/jumper that shows the
same value (the package contains twenty of these connectors/jumpers which show all a different output
voltage). Insert the connector in the hole on top of the adapter (see illustration).
Then determine which adapter plug you need and which should be the plus and the minus. Each of the eight
supplied adapter plugs has on both sides a + and – indication. Connect the adapter plug according to figure
1 or 2 to the power lead.
Re-check all settings and connections. Plug the unit into the mains. The power supply is now ready for use.
Specifications
Power supply: ....................................................................................220 VAC/50 Hz
Output voltages: ......................................................................................5 to 24 VDC
Adjustments: ........................................................................................in steps of 1 V
Max. power: .......................................................................................50 W (661.078)
............................................................................................................70 W (661.081)
Dims: ..............................................................................................35 x 55 x 105 mm
Do not attempt to make any repairs yourself. This would invalid your warranty.
Do not make any changes to the unit. This would also invalid your warranty.
The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings
contained in this manual.
SkyTronic UK cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and
warnings. This is also applicable to all damages in whatever form.
